Referencia de API para desarrolladores -

Empezando

Autenticación

Límite de tarifa

Manejo de respuestas

Referencia de API para desarrolladores v3

Empezando

Se requiere una clave API para que el sistema procese las solicitudes. Una vez que un usuario se registra, se genera automáticamente una clave API para este usuario. La clave API debe enviarse con cada solicitud (consulte el ejemplo completo a continuación). Si la clave API no se envía o está caducada, habrá un error. Asegúrese de mantener en secreto su clave API para evitar abusos.

Autenticación

Para autenticarse con el sistema API, debe enviar su clave API como un token de autorización con cada solicitud. Puede ver el código de muestra a continuación.

cURL PHP

curl --location --request POST 'https://elrd.es/api/url/add' \ 
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);

Límite de tarifa

Nuestra API tiene un limitador de velocidad para protegerse contra picos en las solicitudes para maximizar su estabilidad. Nuestro limitador de frecuencia actualmente tiene un límite de 30 solicitudes por 1 minuto.

Se enviarán varios encabezados junto con la respuesta y estos se pueden examinar para determinar información diversa sobre la solicitud.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP

Manejo de respuestas

Todas las respuestas de la API se devuelven en formato JSON de forma predeterminada. Para convertir esto en datos utilizables, será necesario utilizar la función adecuada según el idioma. En PHP, la función json_decode() se puede usar para convertir los datos en un objeto (predeterminado) o en una matriz (establezca el segundo parámetro en verdadero). Es muy importante verificar la clave de error ya que proporciona información sobre si hubo un error o no. También puede consultar el código de cabecera.

{
    "error": 1,
    "message": "An error ocurred"
}

Account

Get Account

GET https://elrd.es/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

cURL PHP

curl --location --request GET 'https://elrd.es/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "data": {
        "id": 1,
        "email": "sample@domain.com",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}

Update Account

PUT https://elrd.es/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

cURL PHP

curl --location --request PUT 'https://elrd.es/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "newemail@google.com",
    "password": "newpassword"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "email": "newemail@google.com",
    "password": "newpassword"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "Account has been successfully updated."
}

Dominios de marca

List all branded domains

GET https://elrd.es/api/domains?limit=2&page=1

To get your branded domains codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://elrd.es/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}

Create a Branded Domain

POST https://elrd.es/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

Parámetro	Descripción
domain	(required) Branded domain including http or https
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP

curl --location --request POST 'https://elrd.es/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "id": 1
}

Update a Domain

PUT https://elrd.es/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP

curl --location --request PUT 'https://elrd.es/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "Domain has been updated successfully."
}

Delete Domain

DELETE https://elrd.es/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://elrd.es/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Splash personalizado

List all custom splash

GET https://elrd.es/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://elrd.es/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Superposiciones de CTA

List all cta overlays

GET https://elrd.es/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://elrd.es/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Enlaces

List all Links

GET https://elrd.es/api/urls?limit=2&page=1&order=date

To get your links via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request
order	(optional) Sort data between date or click

cURL PHP

curl --location --request GET 'https://elrd.es/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/urls?limit=2&page=1&order=date",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "urls": [
            {
                "id": 2,
                "alias": "google",
                "shorturl": "https:\/\/elrd.es\/google",
                "longurl": "https:\/\/google.com",
                "clicks": 0,
                "title": "Google",
                "description": "",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "alias": "googlecanada",
                "shorturl": "https:\/\/elrd.es\/googlecanada",
                "longurl": "https:\/\/google.ca",
                "clicks": 0,
                "title": "Google Canada",
                "description": "",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a single link

GET https://elrd.es/api/url/:id

To get details for a single link via the API, you can use this endpoint.

cURL PHP

curl --location --request GET 'https://elrd.es/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/url/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "details": {
        "id": 1,
        "shorturl": "https:\/\/elrd.es\/googlecanada",
        "longurl": "https:\/\/google.com",
        "title": "Google",
        "description": "",
        "location": {
            "canada": "https:\/\/google.ca",
            "united states": "https:\/\/google.us"
        },
        "device": {
            "iphone": "https:\/\/google.com",
            "android": "https:\/\/google.com"
        },
        "expiry": null,
        "date": "2020-11-10 18:01:43"
    },
    "data": {
        "clicks": 0,
        "uniqueClicks": 0,
        "topCountries": 0,
        "topReferrers": 0,
        "topBrowsers": 0,
        "topOs": 0,
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "google": 0
        }
    }
}

Shorten a Link

POST https://elrd.es/api/url/add

To shorten a link, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description

cURL PHP

curl --location --request POST 'https://elrd.es/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "shorturl": "https:\/\/elrd.es\/google"
}

Update a Link

PUT https://elrd.es/api/url/:id/update

To update a link, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash]
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data

cURL PHP

curl --location --request PUT 'https://elrd.es/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/url/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "short": "https:\/\/elrd.es\/google"
}

Delete a Link

DELETE https://elrd.es/api/url/:id/delete

To delete a link, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://elrd.es/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/url/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "Link has been deleted successfully"
}

Píxels

List all pixels

GET https://elrd.es/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://elrd.es/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Create a Pixel

POST https://elrd.es/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

Parámetro	Descripción
type	(required) gtmpixel \| gapixel \| fbpixel \| adwordspixel \| linkedinpixel \| twitterpixel \| adrollpixel \| quorapixel \| pinterest \| bing \| snapchat \| reddit
name	(required) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP

curl --location --request POST 'https://elrd.es/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "id": 1
}

Update a Pixel

PUT https://elrd.es/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(optional) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP

curl --location --request PUT 'https://elrd.es/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "Pixel has been updated successfully."
}

Delete Pixel

DELETE https://elrd.es/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://elrd.es/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

Códigos QR

List all QR codes

GET https://elrd.es/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://elrd.es/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/elrd.es\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/elrd.es\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a single QR Code

GET https://elrd.es/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

cURL PHP

curl --location --request GET 'https://elrd.es/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/elrd.es\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}

Create a QR Code

POST https://elrd.es/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
type	(required) text \| vcard \| link \| email \| phone \| sms \| wifi
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP

curl --location --request POST 'https://elrd.es/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "link": "https:\/\/elrd.es\/qr\/a58f79"
}

Update a QR Code

PUT https://elrd.es/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP

curl --location --request PUT 'https://elrd.es/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "QR has been updated successfully."
}

Delete a QR Code

DELETE https://elrd.es/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://elrd.es/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Plans

This endpoint is only accessible by users with admin privileges.

List all plans

GET https://elrd.es/api/plans

Get a list of all plans on the platform.

cURL PHP

curl --location --request GET 'https://elrd.es/api/plans' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/plans",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "data": [
        {
            "id": 2,
            "name": "Business",
            "free": false,
            "prices": {
                "monthly": 9.99,
                "yearly": 99.99,
                "lifetime": 999.99
            },
            "limits": {
                "links": 100,
                "clicks": 100000,
                "retention": 60,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "1",
                    "count": "5"
                },
                "overlay": {
                    "enabled": "1",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "1",
                    "count": "10"
                },
                "domain": {
                    "enabled": "1",
                    "count": "1"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "1"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        },
        {
            "id": 1,
            "name": "Starter",
            "free": true,
            "prices": null,
            "limits": {
                "links": 10,
                "clicks": 1000,
                "retention": 7,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "0",
                    "count": "0"
                },
                "overlay": {
                    "enabled": "0",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "0",
                    "count": "10"
                },
                "domain": {
                    "enabled": "0",
                    "count": "0"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "0"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        }
    ]
}

PUT https://elrd.es/api/plan/:planid/user/:userid

To subscribe a user to plan, send a PUT request to this endpoint with the plan id and user id. The type of subscription and the expiration date will need to be specified. If the expiration date is not specified, the date will be adjusted according to the type.

Parámetro	Descripción
type	monthly \| yearly \| lifetime
expiration	(optional) Expiration date of the plan e.g. 2025-12-05 10:16:52

cURL PHP

curl --location --request PUT 'https://elrd.es/api/plan/:planid/user/:userid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "monthly",
    "expiration": "2025-12-05 10:16:52"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/plan/:planid/user/:userid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "monthly",
    "expiration": "2025-12-05 10:16:52"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "User has been subscribed to this plan."
}

Users

This endpoint is only accessible by users with admin privileges.

List all users

GET https://elrd.es/api/users?filter=free

Get a list of all users on the platform. Data can be filtered by sending a filter parameter in the url.

Parámetro	Descripción
filter	admin \| free \| pro
email	Search a user by email

cURL PHP

curl --location --request GET 'https://elrd.es/api/users?filter=free' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/users?filter=free",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "data": [
        {
            "id": 2,
            "email": "sample2@domain.com",
            "username": "sample2user",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
            "status": "free",
            "planid": 1,
            "expires": null,
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        },
        {
            "id": 1,
            "email": "sample@domain.com",
            "username": "sampleuser",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar.png",
            "status": "pro",
            "planid": 2,
            "expires": "2022-11-15 15:00:00",
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        }
    ]
}

List a single user

GET https://elrd.es/api/user/:id

Get data for a single user.

cURL PHP

curl --location --request GET 'https://elrd.es/api/user/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/user/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "data": {
        "id": 2,
        "email": "sample2@domain.com",
        "username": "sample2user",
        "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
        "status": "free",
        "planid": 1,
        "expires": null,
        "registered": "2020-11-10 18:01:43",
        "apikey": "ABC123DEF456"
    }
}

Create a user

POST https://elrd.es/api/user/add

To create a user, use this endpoint and send the following information as JSON.

Parámetro	Descripción
username	(required) User's username. Needs to be valid.
email	(required) User's email. Needs to be valid.
password	(required) User's password. Minimum 5 characters.
planid	(optional) Premium plan. This can be found in the admin panel.
expiration	(optional) Membership expiration example 2020-12-26 12:00:00

cURL PHP

curl --location --request POST 'https://elrd.es/api/user/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "username": "user",
    "password": "1234567891011",
    "email": "demo@yourwebsite.com",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/user/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "username": "user",
    "password": "1234567891011",
    "email": "demo@yourwebsite.com",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "User has been registered.",
    "data": {
        "id": 3,
        "email": "demo@yourwebsite.com",
        "username": "user"
    }
}

Delete a user

DELETE https://elrd.es/api/user/:id/delete

To delete a user, use this endpoint.

cURL PHP

curl --location --request DELETE 'https://elrd.es/api/user/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/user/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "message": "User has been deleted."
}

GET https://elrd.es/api/user/login/:id

This endpoint will generate a unique link that will allow the user to automatically login to the platform. SSO login urls are valid for 1 hour and they can be used a single time.

cURL PHP

curl --location --request GET 'https://elrd.es/api/user/login/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://elrd.es/api/user/login/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Respuesta del servidor

{
    "error": 0,
    "url": "https:\/\/elrd.es\/user\/login\/sso\/diajzvrqjzyawsriciaeyinjpomenruz"
}

Recursos

Soluciones

Account

Dominios de marca

Splash personalizado

Superposiciones de CTA

Enlaces

Píxels

Códigos QR

Referencia de API para desarrolladores v3

Empezando

Autenticación

Límite de tarifa

Manejo de respuestas

Account

Get Account

Respuesta del servidor

Update Account

Respuesta del servidor

Dominios de marca

List all branded domains

Respuesta del servidor

Create a Branded Domain

Respuesta del servidor

Update a Domain

Respuesta del servidor

Delete Domain

Respuesta del servidor

Splash personalizado

List all custom splash

Respuesta del servidor

Superposiciones de CTA

List all cta overlays

Respuesta del servidor

Enlaces

List all Links

Respuesta del servidor

Get a single link

Respuesta del servidor

Shorten a Link

Respuesta del servidor

Update a Link

Respuesta del servidor

Delete a Link

Respuesta del servidor

Píxels

List all pixels

Respuesta del servidor

Create a Pixel

Respuesta del servidor

Update a Pixel

Respuesta del servidor

Delete Pixel

Respuesta del servidor

Códigos QR

List all QR codes

Respuesta del servidor

Get a single QR Code

Respuesta del servidor

Create a QR Code

Respuesta del servidor

Update a QR Code

Respuesta del servidor

Delete a QR Code

Respuesta del servidor

Plans

List all plans

Respuesta del servidor

Subscribe a user to a plan

Respuesta del servidor

Users

List all users

Respuesta del servidor

List a single user

Respuesta del servidor

Create a user

Respuesta del servidor

Delete a user

Respuesta del servidor

Login a user